How to Apply Grip Tape

Abstract dark banner with lime and white diagonal stripes

To apply grip tape, clean the deck, peel the backing, place the tape from the center outward, press out bubbles, file the edges and cut along them with a blade.

What you need

  • Grip tape sheet
  • Skate tool or file
  • Razor blade or hobby knife

Step by step

  1. Clean the deck.
  2. Peel the backing and lay the tape from one end.
  3. Press from center outward.
  4. Rub the edge with a file to mark the shape.
  5. Cut along the mark.
  6. Poke holes through the bolt holes.

Troubleshooting

Small bubbles can be pierced and pressed flat. Shop skate.

Tips for a clean finish

  • Work in a warm room so the adhesive sticks well.
  • Cut slightly outside the edge, then file back.
  • Use a blade at a shallow angle to avoid cutting the deck.
  • Press the tape along the edges with a screwdriver handle.

When to replace

Replace when grip feels slick, when sections peel or when you notice wear in the main foot area. Some skaters swap after every few weeks, others use a sheet for months.

Related

Skateboard bearings guide.

FAQ

How long does grip tape last?

It depends on use. Replace it when the grit is smooth or peeling.

How do I remove old grip tape?

Warm it with a hair dryer and peel slowly.

How do I avoid bubbles?

Press from the center outward in one pass.

Does grit level matter?

Coarser grit gives more traction but wears shoes faster.